How To Paint Trim With High Carpet

Be aware, this height depends on the thickness of your carpet and padding. You can use a clean, wet rag to pick up the excess paint.

How To Paint Baseboards With Carpet – Diy Painting Tips

Table of Contents

Paint the center section of the trim after the edges.

How to paint trim with high carpet. You need to make it look very deliberate and have a thick trim to pull it off. Use short stokes to cover a few feet of the trim. 1.) to paint baseboards, first vacuum and wipe down baseboards with either a vinegar and water solution (1/2 cup of vinegar and 1 gallon of warm water) and a damp microfiber cloth.

Apply white pigmented shellac primer to the wood trim, using a synthetic fiber paintbrush. 1.) to paint baseboards, first vacuum and wipe down baseboards with either a vinegar and water solution (1/2 cup of vinegar and 1 gallon of warm water) and a damp microfiber cloth. White primer will work if you’re switching to white or light colors, and you can have primer tinted to approximately match for darker shades.

Wait several hours (or days, if using oil paint) for your first layer to dry completely before moving onto the second coat. I love the painted color trim look but it really only works well in super high end homes and with high gloss. If you’re dramatically changing the color.

Then, smooth the section of freshly painted trim with one long stroke. Paint all of your trim, and keep picking up the splatter as you go. Search across the entire site search .

Paint the large areas of wall. If your trim already has a coat of paint on it, a separate coat of primer is only needed in certain circumstances: 2.) gently scuff up the baseboards with an abrasive hand pad giving the baseboards a light buffing.

Pour thoroughly mixed paint into a clean paint tray. You may need to install the baseboard an inch or more off the ground. Only keep a minimal amount of paint on the brush to avoid creating drips.

To better protect the carpet, run another strip of tape next to the first and add a tarp to avoid paint splatters (which will happen no matter how careful you are). You can use carpentry nails or wooden shims. 2.) gently scuff up the baseboards with an abrasive hand pad giving the baseboards a light buffing.

Begin painting the trim in one corner of the room. How to paint baseboards (even over carpet) Pour enough paint into the pail for the section of trim you're working on, then close the lid on the can.

Allow the paint to dry completely before attempting to remove the tape (i suggest two coats of paint and primer if needed). Allow the primer to dry thoroughly for two to three hours or as indicated on the label. The goal of the second layer of paint is to smooth out the color and fill.

Use smooth, even strokes to spread the paint on the trim. Add a second layer of paint. Once you’re done painting, you may have some splatter on the walls.

Begin every new brush stroke in a dry area of the trim, then drag the paint toward the part that already has paint on it. How to paint trim with high carpet. Paint the room with a roller, taking care to keep even pressure on the roller.

So is there a cost effective, resource effective, or labor effective way to paint the baseboard when the room has wall to wall high pile carpet? Dip no more than an inch of the angled paint brush into the paint and wipe away excess. Dip the bottom two inches of the brush in the paint, then wipe most of the excess off on the flat part of the pail.

How To Paint Baseboard Trim On Carpet – Newton Custom Interiors