6.measure the depth of the countertops from the wall. Multiply your total length by 26, the width in inches of standard countertops, to find total countertop.
5.write down the length in the appropriate space on your drawing.
How to measure linear feet for granite countertops. Put a slab on hold (aka, buying granite countertops). You also need to consider where the cook top, sinks, and dishwasher are located. A linear foot is 12 inches wide and 25 inches deep because the standard depth of kitchen countertops is 25 inches.
Compute the area of each section. For example, say the length of the countertop is 108” and the depth of the standard countertop (on a 24” deep cabinet) is 25 ½”; The calculator includes installation price, dimensions, length, as well as the type of material such as granite, marble.
Take measurements of the entire length of each countertop you want covered in granite. 62.5” x 25” = 1562.5”. Don’t stop measuring when you reach a sink but continue to measure until you reach the end of a cabinet, appliance, or a wall.
Please note that granite countertops have a 1 ½” standard over hang from the face of the cabinets. To calculate this number, we will add all the lengths marked with “x” on the sketch. Countertop square footage calculator arch city granite marble inc.
108” x 25.5” = 2,754 (divide this number by 144) 2,754/144 = 19.12 sq ft. A typical countertop overhang extends 1 to 1 1/2 inches from the floor of cabinets, not doors. To find linear footage, you simply need to measure the length in feet, that’s it.
A linear foot is simply a length measurement equal to one foot. A linear foot is 12 inches wide and 25 inches deep because the standard depth for kitchen countertops is 25 inches. Same size as a in this case, so 1562.5”.
This dimension limits the length of a countertop without putting in a seam. You just take the length x width of each section, and add it together. 7.repeat this process for every section of your countertop.
Width, height, or thickness measurements aren’t included. Ikea quartz countertops at 159 per linear foot favorite is 7. 125” x 25” = 3125”.
Countertops are typically measured by contractors and fabricators in a unit called linear feet. this unit is simply the total length in straight lines (thus the term linear) of a countertop of a given depth. Measure each countertop section and record the length and depth dimensions of the sections (in inches, rounded to the nearest inch). The area and length edge of the countertops are the two single most important factors fabricators use to determine the price of the project.
The term “linear” means a shape or movement in a straight line. Countertop sections length” x depth” = area 1 x = 2 x = 3 x = 4 x = 5 x = 6 x = 7 x = 8 x = total square inches: So, a linear foot measurement is a straight line measurement;
4.measure the countertop length from wall to wall (in inches). 412” ÷ 12 = 34.3 ft. Red piece polished edge area will be:
This will reveal the square footage you’ll need to cover in granite. How much should a work plan support? 4 ways to calculate linear feet wikihow.
So, 44 inches times 26 inches yields 3,744 square inches. Many hardware store counters are sold by linear feet, not by 12″ by 12″ square feet. The program takes into account all mathematical parameters such as width, height and square.
This calculation application will be a great addition to your business project and will speed up internal processes in the company. 8.make sure to measure bar tops. Therefore, it is not recommended to make countertops longer than 100” without a seam, or without checking with the fabricator for exact slab sizes.
*standard countertop depth is 26 inches (overhang of cabinets). Counters usually measure 25” or 25 5/16” deep, so make sure you have the right depth for your cabinets and the overhang. ÷ 144 = total square feet:
How to measure countertops you. Measure the length of one section of your countertops by running a measuring tape flush along the back edge of the section from one end to the other end. Divide the figure you get by performing the steps above by 144.
All we have to do is measure the width and length from the front of the counter without measuring any wall sides of the kitchen. 4 ways to calculate linear feet wikihow. If playback doesn't begin shortly, try restarting your device.
A typical granite slab is 9′ x 5′. Multiply your total length by 26, the width in inches of standard countertops, to find total countertop area in square inches. If you measure in inches, divide them by 12 to get the linear feet.
Professional countertop estimating guide great lakes granite. How do you calculate square footage for granite countertops? To calculate how many square feet of countertop you need, measure the linear footage of your current countertop and add 1 ½” overhang at each end.
26” + 74” + 70” + 26” + 36” + 72” + 36” + 72” = 412”.